Product ID:RAGE BODYFILLER, 107
MSDS Date:10/09/1990
FSC:8030
NIIN:00N026829
MSDS Number: BNLFF

FIBRE GLASS-EVERCOAT CO INC

6600 CORNELL RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 800-729-7600

Preparer: JEFF ZYCH

Cage: 18731

FIBRE GLASS-EVERCOAT CO INC

CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

5.0@68F

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 14.36%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

POLYESTER RESIN

Fraction By Weight: 20 - 30%

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 45%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

GLASS FIBERS; (HOLLOW GLASS SPHERES)

Fraction By Weight: <5.0%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL OF RPTD HIGH CONC MAY CAUSE
LIVER/KIDNEY DAM. INTERNATIONAL AGENCIES FOR RESEARCH ON CANCER
(IARC) HAS CLASSED STYRENE AS POSS HUMAN CARCIN (CLASS 2-B). 2-B
CLASSIFICATION IS NOT BASED ON NEW EV IDENCE THAT STYRENE MIGHT BE
CARCIN BUTON REVISED IARC CLASSIFICATION SYS & NEW EVIDENCE FOR
STYRENE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE: IARC GROUP 2B.
Effects of Overexposure:HLTH HAZ:OXIDE. INHAL:VAP MAY CAUSE
NOSE/THROAT, RESP TRACT IRRIT. HIGH CONC MAY CAUSE HDCH/NAUS. RPTD
HIGH CONC EXPOS MAY CAUSE LIVER/KIDNEY DAM. SKIN/EYE:PRLNG/FREQUENT
SKIN CONT MAY CAUSE DEFAT/DRY /W/IRRIT/POSS DERM. EYE CONT MAY
CAUSE TEAR/IRRIT. SKIN ABSORPTION: DERM/IRRIT. INGEST: MAY CAUSE GI
DISTURB,(SUPP DATA)
Medical Cond Aggravated by Exposure:LIVER AND KIDNEY DISORDERS.

First Aid:SKIN:WASH WITH SOAP AND WATER. EYES:FLUSH WITH WATER FOR AT
LEAST 15 MIN & GET MED ATTN. INHAL:REMOVE FROM EXPOSURE. IF UNCON
GIVE ARTF RESP/O*2 AS NEEDED. GET MED ATTN. INGEST:DO NOT INDUCE
VOMIT (AS PIRATION HAZ). GET MED ATTN.

Flash Point Method:CC
Flash Point:98.0F,36.7C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:POLYMERIZATION MAY TAKE PLACE @ ELEVATED
TEMPERATURE SUCH AS IN FIRE. IF CONTAINED, VIOLENT RUPTURE MAY
RESULT.

Spill Release Procedures:REMOVE SOURCES OF IGNITION. ABSORB SPILL WITH
ABSORBENT MATERIAL SUCH AS VERMICULITE OR SAND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID STORAGE ABOVE 100F. STORE ONLY
IN ORIGINAL CONTAINERS.
Other Precautions:DOT SHIPPING NAME-CONSUMER COMODITY. DOT ID NO-PUTTY
N.O.I ITEM NO.150110. DATA SHIPPING NAME-RESIN SOLUTION. DATA HAZ
CLASS-FLAMMABLE LIQUID.

Respiratory Protection:NIOSH/MSHA APPROVED CANISTER TYPE RESPIRATOR
MUST BE WORN TO PREVENT INHAL OF VAPORS OR SPRAY MISTS WHEN TLV OR
PEL IS EXCEEDED. WEAR NIOSH/MSHA APPROVED DUST MASK WHEN SANDING
THE CURED PRODUCT.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL
EXHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:PLASTIC OR CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:REMOVE AND WASH CONTAMINATED CLOTHING. USE
BARRIER CREAM SUCH AS GLOVE COAT WHEN USING PRODUCT.
Work Hygienic Practices:WASH HANDS BEFORE EATING AND DO NOT SMOKE WHILE
USING.
Supplemental Safety and Health
EFTS OF OVEREXP:PAIN AND DISCOMFORT.

HCC:F4
Boiling Pt:B.P. Text:295F,146C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:PASTE. SHARP AROMATIC ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND DIRECT SUNLIGHT.
Hazardous Decomposition Products:HEATING TO DECOMPOSITION MAY CAUSE
IRRITATING ACRID FUMES.
Conditions to Avoid Polymerization:IF HAZ POLYMERIZATION OCCURS WHILE
CONTAINED IN CLOSED CONTAINER, VIOLENT RUPTURE MAY RESULT.

Waste Disposal Methods:SMALL QTY CAN BE REACTED WITH APPROPRIATE
HARDNER TO SOLIDIFY. DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL,
STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.